Minor gems – Drivers
The following links lead to some small but by no means insignificant changes:
Audio
- [
5
] ALSA: add/change some comments describing function return values - [
- [
- [
C DN2
] ALSA: ASoC: add codec driver for TI TAS5086 - [
- [
- [
- [
- [
- [
D 1
] ALSA: hda - Add the generic Headphone Mic feature - [
- [
- [
- [
D
] ALSA: hda - Consolidate add_in_jack_modes and add_out_jack_modes hints - [
- [
- [
1
] ALSA: hda - Implement headset jack functionality for some Dell hw - [
- [
- [
- [
D
] ALSA: Make snd_BUG_ON() always evaluate and return the conditional expression - [
- [
- [
- [
- [
- [
I
] ALSA: usb-audio: Playback and MIDI support for Novation Twitch DJ controller - [
- [
- [
C N1
] ASoC: Add a generic dmaengine_pcm driver - [
C DN
] ASoC: Add codec driver for AK5386 - [
C
] ASoC: imx: Use generic dmaengine PCM - [
C
] ASoC: mxs: Use generic dmaengine PCM - [
D
] ASoC: tegra: add Tegra114 support to the AHUB driver - [
C
] ASoC: tegra: Use generic dmaengine PCM - [
C
] ASoC: ux500: Use generic dmaengine PCM
Graphics
- [
- [
C DN1
] drivers/video: implement a simple framebuffer driver - [
DN
] drm: Add 1600x1200 (UXGA) screen resolution to the built-in EDIDs - [
C
] drm/exynos: add device tree support for fimc ipp driver - [
C
] drm/exynos: enable OF_VIDEOMODE and FB_MODE_HELPERS for exynos drm fimd - [
- [
- [
- [
- [
- [
- [
- [
- [
- [
1
] drm/i915: sprite support for ValleyView v4 - [
- [
- [
- [
2
] drm/nouveau/therm: split the nv50 and nv84 code - [
- [
- [
- [
- [
1
] drm/nve0: magic up some support for GF117 - [
- [
N1
] drm/nvf0/disp: expose display class 2.2 - [
- [
2
] drm/radeon/7xx: add support for golden register init - [
- [
- [
1
] drm/radeon/cayman,TN: add support for golden register init (v2) - [
2
] drm/radeon/evergreen: add support for golden register init - [
2
] drm/radeon/si: add support for golden register init - [
- [
- [
C N1
] video: backlight: add ili922x lcd driver - [
C D 1
] video: fb: vt8500: Convert framebuffer drivers to standardized binding - [
C D
] video: mxsfb: get display timings from device tree - [
D
] video: mxsfb: Introduce regulator support - [
C
] video: vt8500: Make wmt_ge_rops optional
EDAC, Hardware-Monitoring, Watchdog
- [
I
] amd64_edac: Add Family 16h support - [
C DN2
] hwmon: Add driver for LM95234 - [
C DN2
] hwmon: Add ST-Ericsson ABX500 hwmon driver - [
C DN3
] hwmon: (adt7410) Add support for the adt7310/adt7320 - [
- [
C DN3
] hwmon: Driver for Nuvoton NCT6775F, NCT6776F, and NCT6779D - [
C D
] hwmon: (lm75) Add support for the Dallas/Maxim DS7505 - [
D
] hwmon: (lm75) Tune resolution and sample time per chip - [
C
] hwmon: Move the IIO client driver for hwmon out of staging - [
- [
- [
D 5
] hwmon: (nct6775) Add support for automatic fan control - [
- [
D 2
] hwmon: (nct6775) Add support for fan speed attributes - [
- [
D 1
] hwmon: (nct6775) Add support for pwm, pwm_mode, and pwm_enable - [
2
] hwmon: (nct6775) Add support for temperature sensors - [
D 1
] hwmon: (nct6775) Add support for weighted fan control - [
- [
C D
] hwmon: (nct6775) Expand scope of supported chips - [
C DN1
] hwmon: (ntc_thermistor) Add DT with IIO support to NTC thermistor driver - [
C D
] hwmon: (pmbus/lm25066) Add support for LM25056 - [
D
] hwmon: (pmbus/lm25066) Report VAUX as vmon - [
C D 1
] hwmon: (pmbus/ltc2978) Add support for LTC2974 and LTC3883 - [
D
] hwmon: (pmbus/ltc2978) Clean up documentation - [
C D
] hwmon: (tmp401) Add support for TMP431 - [
C D 1
] hwmon: (tmp401) Add support for TMP432 - [
N
] mei: add debugfs hooks - [
D
] mei: bus: Add device enabling and disabling API - [
DN1
] mei: bus: Initial MEI Client bus type implementation - [
C
] mei: move mei-me to separate module - [
N
] mei: nfc: Initial nfc implementation
Input, HID
- [
C
] HID: clarify Magic Mouse Kconfig description - [
C
] HID: Kconfig: Remove explicit transport layer dependencies - [
- [
C 4
] HID: use hid_hw_request() instead of direct call to usbhid - [
- [
- [
- [
C DN
] Input: add support for GRLIB APBPS2 PS/2 Keyboard/Mouse - [
DN
] Input: arc_ps2 - add support for device tree - [
DN
] Input: auo_pixcir_ts - add devicetree support - [
DN
] Input: st1232 - add reset pin handling - [
- [
- [
- [
I
] Input: wacom - add three new display tablets
Media
- [
N1
] Add a V4L2 OF parser - [
DN
] Add common video interfaces OF bindings documentation - [
- [
- [
- [
- [
- [
- [
- [
- [
- [
I
] af9035: add ID [0ccd:00aa] TerraTec Cinergy T Stick (rev. 2) - [
C
] af9035: add support for 1st gen it9135 - [
I
] af9035: basic support for IT9135 v2 chips - [
- [
- [
- [
- [
- [
3
] bttv: convert to the control framework - [
- [
I
] cx231xx : Add support for OTG102 aka EZGrabber2 - [
- [
- [
- [
I 1
] dib7090p: remove the support for the dib7090E - [
9
] dib8000: enhancement - [
D 1
] DocBook media: add VIDIOC_DBG_G_CHIP_NAME documentation - [
D
] DocBook media: document 3.10 changes - [
D
] DocBook media: fix syntax problems in dvbproperty.xml - [
D 2
] DocBook/media/v4l: remove the documentation of the obsolete dv_preset API - [
D
] DocBook/media/v4l: Update version number and document 3.10 changes - [
- [
- [
- [
- [
- [
CID
] em28xx: Add ISDB support for c3tech Digital duo - [
- [
- [
1
] em28xx: add support for em25xx i2c bus B read/write/check device operations - [
- [
2
] em28xx: Prepare to support 2 different I2C buses - [
- [
D
] em28xx: update cardlist - [
C N1
] exynos4-is: Add common FIMC-IS image sensor driver - [
DN
] exynos4-is: Add Exynos4x12 FIMC-IS device tree binding documentation - [
N9
] exynos4-is: Add Exynos4x12 FIMC-IS driver - [
N
] exynos4-is: Add FIMC-IS ISP I2C bus driver - [
N5
] exynos4-is: Add FIMC-IS parameter region definitions - [
1
] exynos4-is: Allow colorspace conversion at FIMC-LITE - [
D
] exynos4-is: Correct clock properties description at the DT binding documentation - [
- [
CI
] go7007: add support for ADS Tech DVD Xpress DX2 - [
C 3
] go7007: convert to core locking and vb2 - [
1
] go7007: convert to the control framework and remove obsolete JPEGCOMP support - [
I 1
] go7007-loader: add support for the other devices and move fw files - [
C 1
] go7007-loader: renamed from s2250-loader - [
5
] go7007: remove all wis* drivers - [
C 1
] go7007: switch to standard tuner/i2c subdevs - [
I
] go7007: update the README - [
- [
C N5
] ITE IT913X silicon tuner driver - [
- [
D
] media: add support for decoder as one of media entity types - [
C DN
] media: coda: use genalloc API - [
1
] media: davinci: vpss: enable vpss clocks - [
- [
C 1
] media: move dvb-usb-v2/cypress_firmware.c to media/common - [
C N1
] media: ths7353: add support for ths7353 video amplifier - [
- [
- [
C N
] ov7640: add new ov7640 driver - [
- [
C N4
] r820t: Add a tuner driver for Rafael Micro R820T silicon tuner - [
1
] r820t: add IMR calibrate code - [
- [
N
] rc: add rc-reddo - [
- [
C
] rtl28xxu: add support for Rafael Micro r820t - [
I
] rtl28xxu: Add USB ID for MaxMedia HU394-T - [
- [
DN1
] s5p-csis: Add device tree support - [
D 1
] s5p-fimc: Add device tree based sensors registration - [
DN2
] s5p-fimc: Add device tree support for FIMC device driver - [
DN
] s5p-fimc: Add device tree support for FIMC-LITE device driver - [
- [
C 2
] s5p-fimc: Add support for ISP Writeback data input bus type - [
- [
C 1
] s5p-fimc: Change the driver directory name to exynos4-is - [
D
] s5p-fimc: Use pinctrl API for camera ports configuration - [
- [
- [
- [
- [
I
] siano: add new devices to the Siano Driver - [
D 1
] soc_camera: Add RGB666 & RGB888 formats - [
1
] solo6x10: add control framework - [
- [
C 2
] solo6x10: convert encoder nodes to vb2 - [
C 1
] solo6x10: convert the display node to vb2 - [
- [
I N9
] solo6x10: sync to latest code from Bluecherry's git repo - [
C N1
] sony-btf-mpx: the MPX driver for the sony BTF PAL/SECAM tuner - [
- [
- [
D
] tuner: add Sony BTF tuners - [
C N1
] tw2804: add support for the Techwell tw2804 - [
C N
] tw9903: add new tw9903 video decoder - [
C N
] tw9906: add Techwell tw9906 video decoder - [
C N
] uda1342: add new uda1342 audio codec driver - [
C DN5
] v4l2: Add a V4L2 driver for SI476X MFD - [
D
] v4l2: Add documentation for the FM RX controls - [
1
] v4l2: add new VIDIOC_DBG_G_CHIP_NAME ioctl - [
- [
D
] v4l2-ctrls: add V4L2_CID_MPEG_VIDEO_REPEAT_SEQ_HEADER control - [
D 1
] v4l2: drop V4L2_CHIP_MATCH_SUBDEV_NAME - [
D
] v4l2: Fix the type of V4L2_CID_TUNE_PREEMPHASIS in the documentation - [
5
] v4l2: pass std by value to the write-only s_std ioctl - [
D
] v4l2: put VIDIOC_DBG_G_CHIP_NAME under ADV_DEBUG - [
D 1
] v4l2: rename VIDIOC_DBG_G_CHIP_NAME to _CHIP_INFO - [
D
] V4L: Add MATRIX option to V4L2_CID_EXPOSURE_METERING control - [
D
] v4l: Define video buffer flag for the COPY timestamp type - [
1
] vb2: Add support for non monotonic timestamps
Staging
- [
- [
C
] hwmon: Move the IIO client driver for hwmon out of staging - [
C
] iio:magnetometer:ak8975 move driver out of staging - [
- [
9
] Staging: ccg: delete it from the tree - [
CI N1
] staging: comedi: adv_pci1724: new driver - [
CI N1
] staging: comedi: amplc_pc263: split out PCI support - [
CI
] staging: comedi: ni_660x: support NI PXI-6624 - [
1
] staging: comedi: pcl818: remove unused RTC dma support - [
N9
] staging: Core files for the DWC2 driver - [
C N2
] staging: drm/imx: Add support for Television Encoder (TVEv2) - [
- [
- [
D
] staging: drm/imx: Use SRC to reset IPU - [
C DN
] staging: dwc2: add platform device bindings - [
C 3
] staging: dwc2: toggle periodic debugging output separately - [
N3
] staging: HCD descriptor DMA support for the DWC2 driver - [
N9
] staging: HCD files for the DWC2 driver - [
C N
] staging: Hook the DWC2 driver into the build system - [
C 2
] staging:iio: Remove adt7410 driver - [
C N9
] Staging: Netlogic XLR/XLS GMAC driver - [
C 9
] staging: net: remove pc300 driver - [
C
] staging: nvec: allow modular build - [
N2
] staging: omap-thermal: create header for register, bitfields and definitions - [
- [
- [
- [
N1
] staging: ramster: add how-to document - [
C N
] staging: rename omap-thermal driver to ti-soc-thermal - [
C N
] staging: sw_sync: Add cpu based sync driver - [
N
] staging: sync: Add tracepoint support - [
- [
- [
D
] staging: video: imx: Add BGR666 support for parallel display - [
1
] staging: vt6655: Remove commented out if()s - [
- [
- [
C
] staging: zcache: enable zcache to be built/loaded as a module - [
3
] The rtl8192e procfs-based debug interface seems very broken - [
USB
- [
DN
] USB: cdc-wdm: implement IOCTL_WDM_MAX_COMMAND - [
D
] usb: chipidea: usbmisc: add post handling and errata fix for mx25 - [
D
] usb: dwc3: omap: minor fixes to get dt working - [
C
] USB: EHCI: DT support for generic bus glue - [
C
] USB: EHCI: make ehci-msm a separate driver - [
C
] USB: EHCI: make ehci-orion a separate driver - [
C 1
] USB: EHCI: make ehci-s5p a separate driver - [
C
] USB: EHCI: make ehci-spear a separate driver - [
DN
] USB: ehci-omap: Add device tree support and binding information - [
C
] USB: ehci-omap: Don't select any PHY driver - [
C
] USB: EHCI: split ehci-omap out to a separate driver - [
C
] USB: enclose EHCI HCD drivers within an if USB_EHCI_HCD block - [
C
] USB: enclose USB_XHCI_HCD related symbols within a if USB_XHCI_HCD block - [
C 1
] usb: gadget: f_obex: convert to new function interface with backward compatibility - [
C
] usb: gadget: f_serial: convert to new function interface with backward compatibility - [
C
] usb: gadget: nokia: use function framework for ACM - [
C
] usb: gadget: serial: convert to new interface of f_obex - [
C
] usb: gadget: serial: convert to new interface of f_serial - [
CI N4
] usb: gadget: the start of the configfs interface - [
- [
C 2
] usb: gadget/uvc: Port UVC webcam gadget to use videobuf2 framework - [
C
] usb: Make USB persist default configurable - [
- [
C
] usb: musb: force PIO-only if we're building multiplatform kernels - [
D
] usb: musb: omap2430: replace *_* with *-* in property names - [
DN
] USB: ohci-omap3: Add device tree support and binding information - [
I
] USB: option: add device IDs for Dell 5804 (Novatel E371) WWAN card - [
I
] usb: option: Add Telewell TW-LTE 4G - [
C
] usb: phy: make it a menuconfig - [
DN
] usb: phy: nop: Add device tree support and binding information - [
C
] usb: phy: remove CONFIG_USB_OTG_UTILS - [
CIDN1
] usb: phy: samsung: Add PHY support for USB 3.0 controller - [
CIDN4
] usb: phy: samsung: Common out the generic stuff - [
D
] USB: remove CONFIG_USB_SUSPEND from Documentation - [
C 1
] USB: remove CONFIG_USB_SUSPEND option - [
CI N
] usb-serial: add support for USB Wishbone-serial adapters - [
Various
- [
- [
- [
- [
- [
- [
C N1
] irqchip: Renesas INTC External IRQ pin driver - [
C DN
] misc: generic on-chip SRAM allocation driver - [
C 2
] rapidio: make enumeration/discovery configurable - [
- [
1
] RDMA/cxgb4: Add Support for Chelsio T5 adapter - [
- [
1
] RDMA/cxgb4: Use DSGLs for fastreg and adapter memory writes for T5. - [
- [
C
] w1: ds2408: make value read-back check a Kconfig option
Low level
- [
1
] ab8500-bm: Add usb power path support - [
1
] ab8500-fg: Add power cut feature for ab8505 and ab8540 - [
DN
] arm: sunxi: Add useful information about sunxi clocks - [
C DN
] arm: zynq: Move timer to generic location - [
D
] at_hdmac: move to generic DMA binding - [
DN
] backlight: lp855x: add a device tree structure - [
D
] backlight: lp855x: move backlight mode platform data - [
D
] backlight: lp855x: remove duplicate platform data - [
D
] checkpatch: add Suggested-by as a standard signature - [
C DN1
] clk: Add axi-clkgen driver - [
D
] clk: add clk_ignore_unused option to keep boot clocks on - [
N
] clk: Add composite clock type - [
DN
] clk: add device tree fixed-factor-clock binding support - [
C DN5
] clk: add si5351 i2c common clock driver - [
DN2
] clk: arm: sunxi: Add a new clock driver for sunxi SOCs - [
D
] clk: exynos4: Add camera related clock definitions - [
D
] clk: exynos4: Add G3D clocks - [
D 1
] clk: exynos4: Add missing CMU_TOP and ISP clocks - [
D
] clk: exynos4: Correct sclk_mfc clock definition - [
D
] clk: exynos4: export clocks required for fimc-is - [
D
] clk: exynos4: Export clocks used by exynos cpufreq drivers - [
D
] clk: exynos4: Export sclk_pcm0 - [
DN4
] clk: exynos4: register clocks using common clock framework - [
D 1
] clk: exynos4: Use mout_mpll_user_* on Exynos4x12 - [
DN2
] clk: exynos5250: register clocks using common clock framework - [
D
] clk: exynos5250: register display block gate clocks to common clock framework - [
DN
] clk: exynos5440: register clocks using common clock framework - [
N1
] clk: samsung: add common clock framework helper functions for Samsung platforms - [
N1
] clk: samsung: add pll clock registration helper functions - [
D 1
] clk: sunxi: Add support for AXI, AHB, APB0 and APB1 gates - [
D
] clk: sunxi: rename compatible strings - [
2
] clk: tegra: Add new fields and PLL types for Tegra114 - [
N7
] clk: tegra: Implement clocks for Tegra114 - [
N
] clk: ux500: Add support for sysctrl clocks - [
N1
] clk: vexpress: Add separate SP810 driver - [
C
] clocksource: samsung_pwm_timer: Add support for non-DT platforms - [
C D
] clocksource: sunxi: Rename sunxi to sun4i - [
DN
] devtree: add binding documentation for sp804 - [
C DN1
] dma: acpi-dma: introduce ACPI DMA helpers - [
D
] dmatest: append verify result to results - [
D 1
] dmatest: gather test results in the linked list - [
D
] dmatest: return actual state in 'run' file - [
DN1
] dmatest: run test via debugfs - [
DN
] Documentation: Add device tree bindings for Samsung PWM timers - [
DN
] Documentation: add missing documentation for tps65217-bl device tree binding - [
D
] documentation: clk: fix couple of misspelling - [
D
] Documentation: dt: gpio-omap: Move interrupt-controller from #interrupt-cells description - [
D
] Documentation: dt: OMAP: l3-noc: Add *reg* in required properties - [
D
] Documentation: dt: update properties in TI GPMC NAND example - [
D
] Documentation: dt: update TI GPMC ethernet binding properties - [
D
] Documentation: mtd: amend the sysfs docs after mtdchar merge - [
D
] document: devicetree: bind pinconf with pin single - [
DN
] drivers/rtc/rtc-at91rm9200.c: add DT support - [
D
] drivers/video/backlight/tps65217_bl.c add default brightness value option - [
DN1
] dsa: add device tree bindings to register DSA switches - [
DN
] DT: add documentation for the Ralink MIPS SoCs - [
D
] DT: add vendor prefixes for Ralink - [
DN
] dt: describe base reset signal binding - [
C N
] DT: MIPS: ralink: add MT7620A dts files - [
C N
] DT: MIPS: ralink: add RT2880 dts files - [
C N
] DT: MIPS: ralink: add RT3883 dts files - [
D
] gpio: add gpio offset in gpio range cells property - [
C DN
] gpio: grgpio: Add device driver for GRGPIO cores - [
D 1
] gpio: grgpio: Add irq support - [
D
] gpiolib-acpi: introduce acpi_get_gpio_by_index() helper - [
C
] gpio-lynxpoint: Add X86 dependency and io-port handling header. - [
DN
] gpio: mcp23s08: convert driver to DT - [
D
] gpio/omap: force restore if context loss is not detectable - [
C N1
] gpio: Renesas R-Car GPIO driver V3 - [
D
] gpio: update gpio Chinese documentation - [
C 1
] gpio: vt8500: Remove arch-vt8500 gpio driver - [
C
] hwspinlock/omap: support OMAP5 as well - [
- [
- [
D
] i2c: i2c-mxs: move to use generic DMA helper - [
- [
C DN1
] i2c: mux: Add i2c-arb-gpio-challenge 'mux' driver - [
C
] iio:adc:ad7923: Add support for the ad7904/ad7914/ad7924 - [
D
] iio: adc: Add dt support for turning on the phy in exynos-adc - [
C DN1
] iio: adc: add exynos adc driver under iio framwork - [
D
] iio: adc: Document the regulator/clocks for exynos-adc - [
C N1
] IIO ADC support for AD7923 - [
DN
] iio: Add OF support - [
D
] iio: at91_adc: add low and high res support - [
D
] iio: at91_adc: add sleep mode support - [
D
] iio: at91_adc: fix missing Sample and Hold time - [
C
] iio:magnetometer:ak8975 move driver out of staging - [
I 2
] ioatdma: Adding support for 16 src PQ ops and super extended descriptors - [
C
] ioatdma: Removing PQ val disable for cb3.3 - [
C N1
] irqchip: Renesas IRQC driver - [
DN1
] irqchip: s3c24xx: add devicetree support - [
DN1
] irqchip: sunxi: Rename sunxi to sun4i - [
C N
] leds: add camera LED triggers - [
C DN2
] leds: add new LP5562 LED driver - [
D
] leds: lp55xx: configure the clock detection - [
C N1
] leds: move LED trigger drivers into new subdirectory - [
- [
- [
- [
- [
1
] mfd: ab8500-debug: Add support for the AB8540 - [
1
] mfd: ab8500-gpadc: Add support for the AB8540 - [
DN
] mfd: as3711: Add OF support - [
C
] mfd: da9055: Drop "select PMIC_DA9055" - [
DN1
] mfd: omap-usb-host: Add device tree support and binding information - [
DN
] mfd: omap-usb-tll: Add device tree support and binding information - [
C
] mfd: pm8921: Disable driver until it gets fixed - [
C
] mfd: Remove twelve unused Kconfig symbols - [
C
] mfd: retu: Add Tahvo support - [
I N1
] mfd: rtsx: Support RTS5249 - [
N
] mfd: si476x: Add chip properties handling code - [
N4
] mfd: si476x: Add commands abstraction layer - [
C N3
] mfd: si476x: Add header files and Kbuild plumbing - [
N2
] mfd: si476x: Add the bulk of the core driver - [
C
] mfd: support stmpe1801 18 bits enhanced port expander - [
C
] mfd: syscon: Add non-DT support - [
D
] mfd: wm8994: Add some OF properties - [
C
] misc: mark spear13xx-pcie-gadget as broken - [
C
] mmc: at91/avr32/atmel-mci: fix DMA-channel leak on module unload - [
D
] mmc: core: Add in support to expose PRV for v4 MMCs - [
DN
] mmc: davinci_mmc: add DT support - [
C 1
] mmc: mxcmmc: add mpc512x SDHC support - [
DN
] mmc: mxcmmc: DT support - [
D
] mmc: mxs-mmc: move to use generic DMA helper - [
D
] mmc: sdhci-s3c: let device core setup the default pin configuration - [
C DN
] mmc: sdhci-sirf: add mmc host sdhci-pltfm based driver for SiRF SoCs - [
C
] mtd: decommission the NAND museum - [
C 9
] mtd: doc: remove support for DoC 2000/2001/2001+ - [
D
] mtd: gpmi: move to use generic DMA helper - [
C
] mtd: maps: kill the rpxlite map driver - [
C
] mtd: merge mtdchar module with mtdcore - [
C 2
] mtd: nand: remove the rtc_from4 driver support - [
D
] mtd: ofpart: support partitions of 4 GiB and larger - [
C 1
] mtd: onenand: remove OneNAND simulator - [
C
] mtd: remove h720x flash support - [
C
] mtd: remove the dbox2-flash map driver - [
C 1
] mtd: remove the dilnetpc map driver support - [
C
] mtd: remove the dmv182 map driver - [
C
] mtd: remove the h1910 NAND driver - [
C
] mtd: remove the ixp2000 map driver - [
C
] mtd: remove the mbx860 map driver - [
C 1
] mtd: remove the ppchameleonevb NAND driver - [
C
] mtd: remove the tqm8xxl map driver - [
- [
C DN9
] pinctrl: add pinctrl driver for imx6dl - [
C DN9
] pinctrl: add pinctrl driver for imx6sl - [
C DN2
] pinctrl: Add pinctrl-s3c64xx driver - [
D
] pinctrl: document the "GPIO mode" pitfall - [
C DN9
] pinctrl: gpio: vt8500: Add pincontrol driver for arch-vt8500 - [
DN9
] pinctrl: imx: move hard-coding data into device tree - [
D
] pinctrl: pinctrl-mxs: document the missing pull-ups - [
C 9
] pinctrl: remove pxa pinctrl driver - [
C 1
] pinctrl: single: support generic pinconf - [
4
] pinctrl: sunxi: Add Allwinner A10 pin functions - [
1
] pinctrl: sunxi: Add Allwinner A13 pin functions - [
DN
] power_supply: Add OF bindings documentation for tps65090-charger - [
C N1
] power_supply: Add support for tps65090-charger - [
DN
] power_supply: Define Binding for power-supplies - [
C
] pwm: davinci: Add Kconfig support for ECAP & EHRPWM devices - [
D
] pwm: pwm-tiecap: Update device-tree binding document - [
D
] pwm: pwm-tiehrpwm: Update device-tree binding document - [
3
] regulator: ab8500: add support for ab8505 - [
2
] regulator: ab8500: Add support for the ab8540 - [
1
] regulator: ab8500: Add support for the ab9540 - [
DN
] regulator: max8952: Add Device Tree support - [
D
] regulator: mc13783: Add device tree probe support - [
C N1
] remoteproc/davinci: add a remoteproc driver for OMAP-L13x DSP - [
C
] remoteproc/omap: support OMAP5 too - [
C 1
] remoteproc: perserve resource table data - [
C D
] Remove GENERIC_GPIO config option - [
C N1
] reset: Add reset controller API - [
- [
D
] serial: mxs-auart: move to use generic DMA helper - [
D
] serial: of_serial: Handle auto-flow-control property - [
D
] serial: of_serial: Handle fifo-size property - [
DN
] serial: pl011: use generic DMA slave configuration if possible - [
C DN1
] spi: add driver for BCM2835 - [
DN
] spi/davinci: add DT binding documentation - [
D
] spi: mxs-spi: move to use generic DMA helper - [
D
] spi: pl022: use generic DMA slave configuration if possible - [
D
] spi/s3c64xx: let device core setup the default pin configuration - [
2
] spi/spi-atmel: add dmaengine support - [
C D 1
] spi/spi-fsl-spi: Add support for Aeroflex Gaisler GRLIB cores normally running on SPARC - [
C DN3
] spi/spi-fsl-spi: Make driver usable in CPU mode outside of an FSL_SOC environment - [
C DN3
] spi/tegra114: add spi driver - [
DN
] SSBI: Convert SSBI to device tree - [
C N1
] sudmac: add support for SUDMAC - [
C D
] thermal: add a warning for temperature emulation feature - [
C DN
] thermal: Add driver for Armada 370/XP SoC thermal management - [
C
] Thermal: build cpu_cooling code into thermal_sys module - [
D 1
] Thermal: build thermal governors into thermal_sys module - [
C
] thermal: cpu_cooling: update Kconfig entry - [
C D
] thermal: exynos: Adapt to temperature emulation core thermal framework - [
D
] thermal: rename notify_thermal_framework to thermal_notify_framework - [
D
] Thermal: update documentation for thermal_zone_device_register - [
D
] tps65090: Update bindings for subnode
Every link is preceded by various letters and numbers in square brackets. The letter "C" identifies patches that modify Kconfig files, which contain the help texts and configuration options displayed by "make menuconfig", "make xconfig" and similar tools during kernel configuration. "D" is used for patches that modify the documentation available under Documentation/ in the kernel branch. "N" identifies changes which create a new file. The numbers provide a rough idea of the patch size: For instance, "1" is used for changes between 10 and 20 KBytes including comment, "2" for patches between 20 and 30 KBytes; changes without a number are less than 10 KBytes, while patches marked "9" are 90 KBytes or more.
Further background information about the developments in the Linux kernel area can be found using the search function at The H Open Source. Information about previous Linux kernel releases can be found in The H's Linux Kernel History. New editions of Kernel Logs are also mentioned on Identi.ca and Twitter by @kernellog2. The Kernel Log author also posts updates about various topics on Identi.ca and Twitter as @kernellogauthor.